Launch Kit

Clean, prepare, shine and protect every element of your car's exterior in under 60 minutes

What's Included

  • C+P Alloy Cleaner: Return your alloys to their showroom best. Fast, effective and efficient alloy cleaner that instantly gets to work bringing your alloys back to life in under 10 minutes.
  • C+P Shampoo: Made from premium grade minerals and lubricants. It breaks down dirt and lifts it from the surface in moments. An average sized family car is complete in under 15 minutes.
  • C+P Glass Cleaner: Immediately cuts through stubborn marks, dirt and grime to leave you with perfectly clean and prepared glass. Smear free formula delivers crystal clear glass in under 10 minutes.
  • S+P Spray Sealant: Unique SiO2 formula enhances the gloss of all surfaces (paintwork, glass, rubber) and leaving a protective layer which lasts up to 6 months, full application takes under 10 minutes.
  • S+P Tyre Dressing: Revitalise your tyre rubber with this easy-to-use dressing. Tired tyre rubber comes back to life in under 5 minutes.

What You'll Need

  • Phase 1: C+P Alloy Cleaner, brush, pressure washer (optional)
  • Phase 2: S+P Shampoo,two buckets, wash mitt OR sponge, drying towel
  • Phase 3: C+P Glass Cleaner, clean microfibre
  • Phase 4: S+P Spray Sealant, two clean microfibre cloths
  • Phase 5: S+P Tyre Dressing, clean cloth

Phase 1

Minute 1: Rinse wheels thoroughly, ideally using a pressure washer to remove any excess dirt.

Minute 3: Thoroughly spray every inch of each alloy and leave to rest for 2 minutes.

Minute 6: Using a brush, agitate the alloys, paying particular attention to the most stubborn areas of dirt.

Minute 10: Rinse each wheel with clean water to wash away dirt.

Phase 2

Minute 11: Prepare two buckets of clean warm water.

Minute 12: Add two caps of Clean + Prepare Shampoo to one of the buckets of water.

Minute 13: Rinse the car to remove any excess / loose dirt.

Minute 15: Soak your wash mitt / sponge into the shampoo bucket and begin shampooing the car from the roof down. Between each soak in the shampoo bucket, be sure to rinse your wash mitt / sponge in the clean water bucket, to remove all dirt and grit.

Minute 21: Leave the shampoo suds to sit on the car for 1 minute.

Minute 23: Rinse the vehicle clean, starting from the highest point of the car, to ensure all remaining dirt runs off the bottom of the car.

Minute 25: Using a drying towel, thoroughly dry all exterior surfaces.

Phase 3

Minute 26: Apply C+P Glass Cleaner to glass surfaces and spread evenly, leaving to rest on surface for 1 minute.

Minute 30: Buff surfaces clean with a clean microfibre cloth.

Phase 4

Minute 35: Spray each panel of the vehicle with Shine + Protect Spray Sealant, evening out with a clean microfibre, leave the product to rest on each panel and move onto the next.

Minute 42: Now product has been applied and evened out on every panel, buff off using a clean microfibre, starting with the first panel you applied the product to.

Phase 5

Minute 50: Spray S+P Tyre Dressing onto the clean and dry tyre wall, spreading with a clean cloth immediately after application. Repeating on each of the tyres.

Minute 55: Your wheels, bodywork and windows have now been cleaned, prepared, shined and protected.

Buy Launch Kit

Our starter kit includes the Alloy Cleaner, Shampoo, Glass Cleaner Spray Sealant and Tyre Dressing for £42

Find Out More